Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector's menu system.
1. Press the
button on the remote control or on the
Menu
projector's control panel. You see the main menu.
2. Select the
menu and press
Reset
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're finished, press
Checking Lamp Usage
To check the number of hours the lamp has been used, press the
button and highlight the
Menu
. You see this screen:
Enter
and press
.
Enter
press
Yes and
Enter
to exit.
Menu
menu. You see a screen like this:
Info
note
Do not reset the lamp timer
if you have not replaced the
lamp. Otherwise, you will
receive incorrect lamp usage
information on the Info
menu; see page 65.
.
note
The information displayed
depends on the input signal
currently selected.
If you have used the
projector for less than
10 hours, the hours are
listed as
Maintaining the Projector
.
0H
65