Toshiba RAV-SP1104AT8-E1 Service Manual page 98

No. Part name
1. Detachment
Discharge
2
port cabinet
1) Carry out the operation in 1. of
2) Remove the screws fixing the inverter assembly,
3) Remove the screws for the discharge port cabinet
4) Remove screw for the discharge port cabinet and
5) Remove screw for the discharge port cabinet and
6) Remove screws for the discharge port cabinet
2. Attachment
1) Attach the discharge port cabinet and end board
2) Mount other removed screws into original
Procedure
the discharge port cabinet and the partition board.
(ST1T Ø4 × 8, 4 pcs.)
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
heat exchanger. (ST1T Ø4 × 8, 1 pc.)
the motor base. (ST1T Ø4 × 8, 2 pcs.)
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
of heat exchanger and fix with a screw.
(ST1T Ø4 × 8, 1 pc.)
positions.
above.
– 98 –
Remarks
Heat exchanger Motor base
Discharge Discharge Discharge
port cabinet port cabinet port cabinet
Fin guard Bottom plate