Toshiba RAV-SP1104AT8-E1 Service Manual page 108

No. Part name
1. Detachment
PMV coil
11
1) Carry out work of item 1 of
2) Turn the coil while pulling upward and then
2. Attachment
1) Surely match the positioning projection of
1. Detachment
Fan guard
12
1) Carry out works of item 1 of
To prevent scratch on the product, carry out
the work on cardboard, cloth, etc.
2) Remove the discharge port cabinet and then
3) Remove the screw for the bell mouth and
4) Remove the hooking claws (8 positions) of
2. Attachment
1) Push the hooking claws (8 positions) with
2) Attach the bell mouth fixed with screws and
Check that all the hooking claws are fixed at
the specified positions.
Procedure
remove the coil from the PMV main unit.
the coil with the concave part of PMV main
unit and then fix it.
REQUIREMENT
put on it so that the fan guard side directs
downward.
fan guard.
(PT2P Ø3 × 14 and washer, 4 pcs.)
the fan guard.
hands from the front side to fix the claws.
washers.
(PT2P Ø3 × 14 and washer, 4 pcs.)
REQUIREMENT
.
Positioning projection
and 1 of .
Fan guard
– 108 –
Remarks
Concave part PMV main unit
PMV coil
PT2P Ø3 14 and washer
Discharge
Bell mouth
port cabinet
Hooking claw
Straight line ofbell moouth