Cisco MERAKI MR44 Installation Manual page 15

Then adjust the MR44 AP to guide the AP's bottom slot into the cradle's bottom tab until it clicks into place. Once in
place, the MR44 AP should be secured to the cradle by using one of the included screws in the cradle's bottom tab.
To release the AP from the mount cradle, first remove the security screw that secures the MR44 AP to the cradle's
bottom tab. While holding the MR44 AP with one hand, press the cradle's bottom tab upwards, releasing the MR44 AP
from the bottom of the cradle. Then remove the MR44 AP from the cradle's top tab.
Desk or Shelf Mount
The access point can both be placed on a desk or shelf resting on the non-scratch rubber feet. The mount cradle is not
necessary for a desk or shelf installation.
15