Printing On Posterboard - Epson Stylus Pro 7800 Quick Reference Manual

Loading and Using Cut Sheet Paper
Loading and Using Cut Sheet Paper
1
Remove any roll paper from the paper path. Make
sure the printer is on and the roll paper cover is
closed.
2
Press the Paper Source button until the
appears on the LCD.
3
Release the paper lever.
Note: If you're printing on small sheets or fine art
paper, do not release the paper lever.
4
Feed the sheet into the paper slot. Make sure the
right edge of the paper is straight and aligned with
the marks on the roll paper cover.
5
If you released the paper lever, return it to the
locked position.
6
Press the
the printing position automatically and READY
appears on the control panel.
Caution:
icon
move the paper lever during printing, or while the
Power or Pause light is flashing.
7
Print your page. After it is finished, the sheet stays
in the printer.
8
To remove your print, press the

Printing on Posterboard

When you print on posterboard or other thick media
(more than 19 mil thick), you should open the front
cover before loading as described below.
1
Make sure the printer is on and the roll paper cover
is closed.
2
Press the
appears on the LCD.
3
Release the paper lever.
2
Pause button. The sheet feeds into
To avoid damaging the printer, never
Paper Source button until the
button.
icon