Panasonic TH-75SQ1W Operating Instructions Manual page 66

1-1 [Input change mode]: [Quick] detailed
settings
Promptly switches to the backup input if an
interruption of video occurs, and enables switching
between digital (HDMI1 / HDMI2) inputs.
Note
●
This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
● This function may not operate correctly depending on
the image playback device or video signal.
■
[Primary backup input]
Sets the first priority backup input.
(None) / [HDMI1] / [HDMI2] / DisplayPort] / [DVI-D]
/ [SLOT]
The input that is of the same type as the one in use
for viewing will be greyed out.
■
[Secondary backup input]
Sets the second priority backup input.
(None) / [HDMI1] / [HDMI2] / DisplayPort] / [DVI-D]
/ [SLOT]
The input that is of the same type as the one in use
for viewing will be greyed out.
■
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
■
[Changing mode]
Select speed of input switching.
[High speed]:
If switching between the same signal formats, it is
possible to switch within 1 second.
If switching between the different signal formats,
picture noise is caused.
[Normal speed]:
If switching between the same signal formats, it is
possible to switch within 2 seconds.
If switching between the different signal formats, it
takes 3 to 4 seconds to switch but picture noise is
not caused.
■
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
66
English
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
■
[Main input]
Displays the (main) input set by switching input.
■
[Current input]
Displays whether the input currently in use for viewing
is the (main) input set by switching input or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI1
HDMI2
DisplayPort
DVI-D
SLOT
HDMI1
HDMI2
DisplayPort
DVI-D
Backup
SLOT
DIGITAL
LINK
PC
USB
○: S electable for both Primary and Secondary.
×: Not selectable for neither Primary nor Secondary.
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
Full
Main input
Backup OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Full
Backup Input
HDMI2
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
Main
DIGITAL
PC USB
LINK
○ × ×
× × ×
× × ×
× × ×
×
×
×
×