Signal - Panasonic TH-75SQ1W Operating Instructions Manual

■
[Location]
Assign the positions of portrait screens.
1 to 3
Portrait screen display example
When [Portrait display] is set to [Off], the enlarged
•
position can be confirmed on the screen if [No. of
displays] is set to [3].
Note
●
The settings are memorised separately for each input
terminal.
●
It is possible to set [Display format], [Bezel
adjustment] and [Location] when [No. of displays] is
[3].
●
This menu will be greyed out and cannot be set under
the following conditions.
When [Multi screen display] is [On] (see page 55)
•
When [USB media player settings] - [Schedule play
•
function] is [Enable] (see page 81)
●
When [Portrait display] is [On], the aspect mode
cannot be changed. (see page 40)
●
For 98 and 86 inch models, this setting is displayed
only when the main software version is 3.0000 or
later.
1 2 3

Signal

Examples of [Signal] submenu screen
When HDMI is selected
Signal
YUV/RGB-in select
Cinema reality
Noise reduction
MPEG noise reduction
Signal range Full(0-255)
Frame creation
Dynamic backlight control
EDID select 4K/60p/HDR
Dynamic range
Colour gamut
H-freq. 33.72
V-freq. 60.00
Dot clock freq. 74.18
1080/60i
Signal format
HDCP status None
When DisplayPort is selected
Signal
YUV/RGB-in select
Cinema reality
Noise reduction
MPEG noise reduction
Signal range Full(0-255)
Frame creation
Dynamic backlight control
H-freq.
33.72
V-freq. 60.00
Dot clock freq. 74.18
1080/60i
Signal format
HDCP status None
When DVI-D / DIGITAL LINK / SLOT is selected
Signal
YUV/RGB-in select
Cinema reality
Noise reduction
MPEG noise reduction
Signal range Full(0-255)
Frame creation
Dynamic backlight control
H-freq. 33.72
V-freq. 60.00
Dot clock freq.
74.18
Signal format 1080/60i
HDCP status None
YUV
Off
Auto
Off
Off
Off
Auto
Auto
kHz
Hz
MHz
YUV
Off
Auto
Off
Off
Off
kHz
Hz
MHz
YUV
Off
Auto
Off
Off
Off
kHz
Hz
MHz
English
59