Panasonic TH-75SQ1W Operating Instructions Manual page 140

Corresponding
signal
1920 x 1080/60 1 920 x 1 080
1920 x 1200/60 1 920 x 1 200
1920 x 2160/60 1 920 x 2 160
1920 x 2160/60 1 920 x 2 160
2560 x 1440/60 2 560 x 1 440
2560 x 1600/50 2 560 x 1 600
2560 x 1600/60 2 560 x 1 600
3840 x 1080/60 3 840 x 1 080
3840 x 2160/30 3 840 x 2 160
3840 x 2160/60 3 840 x 2 160
*1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*2: Signals to represent formats are as follows.
R : D-sub RGB (PC IN)
Y : YP P /YC
B R B
D : DVI-D (DVI-D IN)
H : HDMI (HDMI 1, HDMI 2)
DL : DIGITAL LINK (DIGITAL LINK)
DP : DisplayPort (DisplayPort)
The analogue input supports onG and onY.
*3: Based on VESA CVT-RB (Reduced Blanking) standard
*4: YC
C 420 format only supported.
B R
*5: S ignals with ○ in the Plug and Play-supported signal column are the ones written in EDID (Extended Display
Identification Data) of this unit.
For signals without ○ in the Plug and Play-supported signal column, resolutions may not be selected on the PC
side even if this unit supports those signals.
Note
●
An auto detected signal format may be differently displayed from the actual input signal.
●
[ i ] shown after the number of dots of resolution means the interlace signal.
● When 1080/30PsF signal and 1080/25PsF signal are input, they are processed as 1080/60i signal and 1080/50i
signal, and then displayed.
● When 1920 x 2160/60 signal (dot clock frequency 297.00 MHz, DIGITAL LINK format) is input, 3840x2160/60p is
displayed.
140
English
Scanning
frequency
Resolution
(Dot)
Horizontal
(kHz)
67.50
74.04
133.29
135.00
88.79
82.37
98.71
66.63
65.69
133.31
C (PC IN)
R
Dot clock
frequency Format*
Vertical
(MHz)
(Hz)
60.00 148.50 R/D/H/DL/DP
59.95 154.00 R/D/H/DL/DP
59.99 277.25 H/DL/DP
60.00 297.00 H/DL/DP
59.95 241.50 H/DL/DP
49.95 286.00 H/DL/DP
59.97 268.50 H/DL/DP
59.97 266.50 H/DL/DP
29.98 262.75 H/DL/DP
60.00 533.25 H/DP
Plug and Play-supported signal*
HDMI
2
EDID EDID EDID EDID
1 2 3 4
○ ○ ○ ○
○ ○ ○ ○
○
5
DVI-D/
DL DP
PC
○ ○ ○
○ ○ ○
○ ○
○
○