NewAir AC-14100E Owner's Manual page 13

WINDOW SLIDER KIT INSTALLATION
Your window slider kit has been designed to fit most standard "vertical" and
"horizontal" window applications. However, it may be necessary to
improvise/modify some aspects of the installation procedures for certain types
of windows.
Note: If the window opening is less than the minimum length of the window
slider kit, cut the piece with a hole in it, so that it is the correct size to fit the
window opening. Leave the hole in the window slider kit intact. Never cut out
the hole in the window slider kit.
1. Open the window and insert the window kit into the open gap.
2. Close the window until the window kit is held securely. You may need to
expand the size of the window kit using the included window spacers. This
technique can also be used for sash windows.
3. Insert one end of the exhaust hose into the exhaust air outlet located on
the back of the air conditioner. Attach the exhaust hose adapter to the
other end of the exhaust hose and connect the adapter to the window kit.
www.newair.com
EN
13