ZyXEL Communications NSG Series User Manual page 36

The following table describes the labels in this screen.
Table 20 Maintenance > Diagnostics > Network Tool
LABEL
Network Tool
Domain Name or IP
Address
Interface
Extension Option
Test
Stop
Reset
Chapter 7 Maintenance
DESCRIPTION
Select PING IPv4 to ping the IP address that you entered.
Select TRACEROUTE IPv4 to perform the traceroute function. This determines the path a
packet takes to the specified computer.
Type the IPv4 address of a computer that you want to perform ping or traceroute in
order to test a connection.
Select an interface through which the packet is transmitted.
Enter the extended option if you want to use an extended ping or traceroute
command. For example, enter "-c count" (where count is the number of ping
requests) to set how many times the NSG pings the destination IP address, or enter "-w
waittime" (where waittime is a time period in seconds) to set how long the NSG waits
for a response to a probe before running another traceroute.
Click this button to start to ping or run a traceroute.
Click this button to terminate the current ping operation or traceroute.
Click this button to return the screen to its last-saved settings.
NSG Series User's Guide
36