ZyXEL Communications NSG Series User Manual page 19

Table 10 Monitor > USB Storage (continued)
LABEL
Status
Detail
Chapter 5 Monitor
DESCRIPTION
Ready - you can have the NSG use the USB storage device.
Click Remove Now to stop the NSG from using the USB storage device so you can
remove it.
Unused - the connected USB storage device was manually unmounted by using the
Remove Now button or for some reason the NSG cannot mount it.
Click Use It to have the NSG mount a connected USB storage device. This button is
grayed out if the file system is not supported (unknown) by the NSG.
none - no USB storage device is connected.
This field displays any other information the NSG retrieves from the USB storage device.
• Deactivated - the use of a USB storage device is disabled (turned off) on the NSG.
• OutofSpace - the available disk space is less than the disk space full threshold.
• Mounting - the NSG is mounting the USB storage device.
• Removing - the NSG is unmounting the USB storage device.
• none - the USB device is not connected.
NSG Series User's Guide
19