Epson Stylus Photo 870 Printer Basics Manual page 56

5. Click the
Setup
6. Click the
Properties
7. Click the Main tab, if
necessary. Select
as the Media Type setting.
Also make sure the
PhotoEnhance setting is
turned off.
8. Click the
Paper
9. Select these settings:
Roll Paper
Source; this leaves a margin
of at least 0.12-inch
(3 mm) on both sides of
your printout
User Defined
Size; enter the size of your
document in the dialog box
that appears and name your
custom page size
Banner Mode
If you added margins to the top and bottom of your panoramic or
banner, click the Save roll paper checkbox. This retains your margin
and feeds less paper before your next print job on roll paper.
If you want to print a cutting line at your page boundaries, select Cut
Sheet Mode, then click the Print page frame checkbox.
button. You see the Print dialog box.
button. You see your printer settings dialog box.
Photo Paper
tab.
as the Paper
as the Page
as the Roll Paper Option
Select Photo
Paper
Make sure
PhotoEnhance
is turned off
Select Roll
Paper
Select User
Defined, enter
your document
size, and name
the custom page
size
Select
Banner Mode
51