Table of Contents
Advertisement
Caution:
c
Always press the e ink cartridge
replacement button to move the print head.
Do not move the print head by hand. Doing
so may damage the printer.
While the ink is charging, the P power light
flashes and the printer produces a variety of mechanical sounds.
These sounds are normal. When the ink delivery system has been
charged, the print head returns to the home (far right) position and
the P power light comes on.
Caution:
c
Never turn off the printer while the P power light is flashing.
8. Close the printer cover.
Checking the printer
Before printing your first page, you need to make sure that the printer
is working correctly by loading paper, then printing a nozzle check page
and, if necessary, cleaning the print head. Refer to the appropriate
section below.
Loading paper
Follow the steps below to load plain paper in the printer.
1. Lower the output tray and slide the left edge guide so that the
distance between the edge guides is slightly wider than the width
of your paper.
2. Fan a stack of paper, then tap it on a flat surface to even the edges.
3. Load the stack of paper in the sheet
feeder with the printable side up and
the right edge of the paper resting
against the right edge guide. Then,
slide the left edge guide against the
left edge of the paper.
Note:
Always load paper into the sheet feeder short edge first.
Make sure that the paper stack fits under the arrow mark inside the
edge guide.
printable
side up
Advertisement
Table of Contents
