For Macintosh Users - Epson Stylus Photo 790 Setup Manual

5. Make sure your printer is selected in the
Name list box, then click Properties. The
printer driver opens.
6. Click the Main tab, then click anywhere
in the Media Type box and select Photo
Quality Ink Jet Paper.
7. Select Color as the Ink setting.
8. Select Automatic as the Mode setting.
When Automatic is selected, the printer
software optimizes other settings
according to the Media Type and Ink
settings you make.
9. Click the Paper tab, then click anywhere in the Paper Size box and
select the paper size that is loaded in the printer.
10. Click OK at the bottom of the printer driver window. You return to
the Print dialog box (or a similar dialog box).
11. Click Close, Print, or OK to print. You may need to click a
combination of these buttons.
While printing, the EPSON Progress Meter is displayed, showing the
printing progress and the status of your printer.
Note:
If the sample file does not print correctly , see "Problem Solver" in the online
Reference Guide for solutions.

For Macintosh users

Follow these steps to print the sample file.
1. Make sure that A4 or Letter size paper is loaded in the printer.
2. Insert the printer software CD in the CD-ROM drive.
3. Open the Install Printer Driver/Utility folder in the EPSON folder or
the Installation folder in your preferred language folder, then
double-click the README file.
4. Click Page Setup on the File menu. The following dialog box
appears.