Epson Stylus Photo 790 Setup Manual page 6

Note:
It is possible to install the Reference Guide on your hard drive from the
Installer dialog box, as shown above. To install the guide, click Online
Guide and then
the on-screen instructions. When the installation is complete, an ESP790
Guide icon appears in the EPSON folder. Double-click the icon to open
the guide.
5. Follow the on-screen instructions to turn on your printer.
For Windows Me and 98 users, the printer port configuration starts
automatically.
For printers connected via the USB cable, the USB device driver
installation starts automatically at this point. When a message
appears asking you to restart your computer, do so.
If you are a Windows 2000 user and using parallel cable, click the
Stop Search button when the USB device driver installation starts,
then follow the on-screen instructions.
6. After turning on the printer, the Setup
utility opens automatically.
Follow the on-screen instructions to
install the ink cartridges, check the print
head nozzles, and clean the print head.
When a message appears informing you
that the setup is complete, click OK.
Note:
If the Setup utility does not start, proceed to section
cartridges using the printer's control panel.
7. When a message appears informing you that the installation is
complete, click OK.
Note:
If an error message appears, either the printer driver or the EPSON USB
printer device driver is not installed correctly. See "Troubleshooting" in
the Daily Use guide for details.
. Then, click Install Reference Guide and follow
to install the ink