EVGA Z490 FTW User Manual page 38

EVGA Z490 FTW (122-CL-E497)
EPS 8-pin 12V Power (PWR )
8P
, the 8-pin ATX 12V power connection(s), is used to provide
EPS PWR 8P
power to the CPU. Align the pins to the connector and press firmly until
seated. The secondary EPS, if present, is optional for improved overclocking.
Please remember to make sure that the tab on the EPS socket is aligned with
the release clip on the cable. NOTE: If the tab and release clip are on opposite
sides, yet the power connector fits, then you are using a PCIe 8-pin cable, which
WILL damage the board if powered on. Please review installation instructions
from your power supply manufacturer to verify which connectors may be used
for the CPU power.
- 38 -