EVGA Z490 FTW User Manual page 114

EVGA Z490 FTW (122-CL-E497)
Room Correction menu without an error message. All speakers will initially show semi-
transparently. To edit this menu, check the box for "Enable Room Correction" at the
bottom-center.
After you check the box to Enable Room Correction, you will need to select whether
you want distances displayed in Feet or Meters. Once selected, the unit of measurement
will be colored in light orange, and will be reflected in the measurements below for each
speaker. From here, enter the measurements from the seating area to each speaker.
Once the distances are entered, test the audio and adjust the gain value to your liking.
- 114 -