Learning about the printer
Configured model
Hardware option Alternative hardware option
1
4‑bin mailbox
2
2100‑sheet tray
3
Caster base
4
550‑sheet trays
5
Staple finisher
When using optional trays:
•
Always use a caster base when the printer is configured with a 2100‑sheet tray.
•
The 2100‑sheet tray must always be at the bottom of a configuration.
•
If the 2100‑sheet tray is installed, then you cannot use an optional 550‑sheet tray.
•
A maximum of two optional trays may be configured with the printer.
•
The printer supports only one finisher at a time.
•
Offset stacker
•
Staple finisher
•
Staple, hole punch finisher
550‑sheet trays
Caster base
2100‑sheet tray
•
4‑bin mailbox
•
Staple, hole punch finisher
•
Offset stacker
14