Running A Printer Check - Epson Stylus Color 600Q User Manual

Troubleshooting
Caution:
Use paper that's at least 8.2
inches wide. Otherwise the
print head will spray ink
directly onto the platen.
For the latest information, check the
program and the ReadMe file in the
group or folder.
If none of the suggested solutions in this chapter solve
your problem, contact
to Get Help" in the Introduction.

Running a Printer Check

You can run a printer check to determine whether the
problem comes from the printer itself or some other source.
If the results are satisfactory, the problem lies in software
settings, the interface cable, or your computer.
If the printer check does not print correctly, you have a
problem with your printer. See the suggestions in this
chapter for possible solutions.
Follow these steps to check the printer:
1. Make sure both the printer and computer are turned off.
2. Disconnect the interface cable from the printer.
3. Make sure paper is loaded in the printer.
4. Hold down the load/eject button and press the
button to turn on the printer. Then release both buttons.
The printer prints one page containing a nozzle check
pattern and the printer's ROM version. The following
sample is in black, but the actual printout is in color.
W0186
5. After it prints the page, turn off the printer. Reconnect the
interface cable and turn on your printer and computer.
6-2
EPSON
EPSON
as described under "Where
EPSON
02BB
600Q Help
program
power