Using The Control Panel - Epson Stylus Color 600Q User Manual

Using the Control Panel

1. Make sure the printer is turned on and not printing, and
that the black and
2. Press the cleaning button and hold it for three seconds.
Cleaning takes about two minutes, during which the
printer makes some noise and the
After the cleaning cycle is complete and the
light stops flashing, you need to run a nozzle check to
check the print quality and reset the cleaning cycle.
3. Access the Main printer settings dialog box as described
in Chapter 1.
4. Click the
Utility
5. Click the
Nozzle Check
instructions on examining the nozzle check pattern.
If your print quality has not improved, repeat the steps above.
If you don't notice any improvement after doing this
several times, check the print quality solutions in Chapter 6,
"Troubleshooting."
5-3
Maintenance and Transportation
color ink out lights are off.
tab. You see the Utility menu.
icon See the next section for
.
power light flashes.
power