Running A Printer Check - Epson M100 User Manual

Light status
The power light is flashing
The paper light is flashing
The power light is flashing
The paper light is on
The power light is on or
flashing
The ink light is flashing
The paper light is flashing
The ink light is on
The paper light is on
The power light is flashing
The paper light is flashing
The ink light is flashing
Parent topic:
Related references
Paper Feeding Problems
Paper Jam Problems
Paper Ejection Problems

Running a Printer Check

Running a printer check helps you determine if the printer is operating properly.
1. Press the
2. Disconnect any interface cables connected to your product.
3. Load plain paper in the product.
Condition/solution
Paper is jammed in the product. Remove the jammed paper, and press
the cancel button to clear the error.
No paper is loaded or multiple sheets fed at one time. Load paper in the
product, and press the
The ink pads are near the end of their service life. Contact Epson for
support. (To continue printing, press the
An error has occurred during firmware updating. Connect your product
using a USB cable and try updating the firmware again. If the error
message continues, contact Epson for support.
A general printer error has occurred. Turn the product off and then back
on again. If the error continues, check for a paper jam. If the error
persists, contact Epson for support.
Solving Problems
power button to turn off the printer.
cancel button to clear the error.
72
cancel button.)