Epson Stylus Color 600Q User Manual page 52

Managing Print Jobs and Network Printing
Deleting a Stalled Print Job
If you're having trouble printing, it may be because of a
stalled print job. Follow these steps to delete it so you can
continue printing:
1. Open the Spool Manager as described on page 4-2.
2. Click on any print jobs marked
Document menu and click
3. Click .
Yes
4. Exit Spool Manager and try printing again.
Changing the Default Spool Directory
If you get an error message when you try to print, or printing
is very slow, you can try changing your default spool
directory. Follow these steps:
1. Make a directory on your hard disk where you want
Spool Manager to store journal files, for example,
C:\SPLTEMP.
2. Open the Spool Manager as described on page 4-2.
3. Choose
Default Spool Directory
4. In the dialog box, change the spool directory to the one
you created in step 1. Then click
5. Make sure
EPSON 600Q
from the Queue menu. The Queue Setup dialog box
Setup
appears.
6. Make sure the spool directory is the one you created in
step 1. Also make sure
checked. Then click
and don't see the Status Monitor when you print, make
sure it's unchecked.)
4-3
, then open the
Held
.
Delete
from the Options menu.
.
OK
is selected, and then choose
Use Print Manager for this port
. (If you are using Windows 95
OK
is