Epson Stylus Color 600 User Manual page 59

For information about any
of these procedures, use
the Spool Manager Help
menu.
Select the information you want to see in the Spool
Manager window
Prevent the Despooler popup window from appearing on
your screen whenever you print
Change your default spool directory
Deleting a Stalled Print Job
If you're having trouble printing, it may be because of a stalled
print job. Follow these steps to delete it so you can continue
printing:
1. Open the Spool Manager as described on page 4-2.
2. Click on any print jobs marked
Document menu and click
3. Click .
Yes
4. Exit Spool Manager and try printing again.
Changing the Default Spool Directory
If you get an error message when you try to print, or printing is
very slow, you can try changing your default spool directory.
Follow these steps:
1. Make a directory on your hard disk where you want Spool
Manager to store print jobs, for example, C:\SPLTEMP.
2. Open the Spool Manager as described on page 4-2.
3. Make sure
EPSON S
choose from the Queue menu. The Queue Setup
Setup
dialog box appears.
4-3
Managing Print Jobs and Network Printing
, then open the
Held
.
Delete
tylus 600 is selected, and then
COLOR