Mount New Gauge Cluster
1)
Remove old gauge cluster from dash.
2)
Install new gauge cluster from the back of the dash. It is secured to
the dash using four bolts and one clamp.
3)
Insert a bolt through the front of the dash to the left and right of the
gauge cluster.
4)
Install the mounting bracket on the back, bottom side of the gauge
cluster. Align the two holds in the bracket with the two bottom
mounting holes of the dash.
Picture showing bracket placement at bottom rear of gauge cluster
5)
Insert two bolts through the front of the dash at the bottom of the
gauge cluster and through the bracket in the back of the gauge.
Picture showing bottom left mounting bolt
Picture showing left front mounting bolt
Revised September 13, 2013