EVGA Z690 CLASSIFIED User Manual page 56

EVGA Z690 CLASSIFIED (121-AL-E698)
3. The RAID Level is set by default to RAID0 (Stripe), so you will need to change
it to RAID5 (Parity). Available drives for the RAID will be listed here, along
with a blank box to allow you to select whether you want each drive to be part
of the RAID. In this case, we will select all SSDs for the RAID, so we will select
each drop-down and choose the "X" option. After configuring your RAID
Level, disks, Strip Size, and RAID capacity, select "Create Volume".
4. Once the volume is created, you will see a list of your created RAID volumes.
Click each volume for more information
5. Inside the RAID Volume Info menu, you can review the basic details about the
RAID, including the physical drives, as well as the option to delete or repair the
RAID volume if necessary.
- 56 -