To Flash From Power On State - EVGA Z690 CLASSIFIED User Manual

EVGA Z690 CLASSIFIED (121-AL-E698)
C. To flash from power on state:
A third method of flashing the BIOS can be done without going into the BIOS
or from within Windows. The steps for flashing directly from power on are
located below, in the "Flashing the BIOS Without a CPU" section. These steps
will explain how to prepare the USB flash drive included with your Z690
CLASSIFIED motherboard to update with a newer BIOS using the method
below.
a. Plug in the USB flash drive included with your Z690 CLASSIFIED
motherboard, and boot into Windows.
b. Navigate to the USB flash drive so you can view the installed folders.
In the root of the flash drive, you should notice a file named
"EVGAE698" or "EVGAE698.bin". We highly recommend that you
make a backup of this file, in case you discover an issue with the new
BIOS or are unable to boot after flashing the new BIOS.
c. Download the latest BIOS for the Z690 CLASSIFIED from
https://www.evga.com/drivers, and unzip the file to your desktop.
d. Inside the folder will also be a .bin file with the name of the new BIOS.
Right-click the .bin file and select "Rename". Change the name to
"EVGAE698.bin".
e. Replace the existing EVGAE698.bin file in the EVGA USB flash drive
with the new BIOS that you downloaded and renamed.
f. At this point, you are ready to begin the BIOS update. Follow the steps
in the "Flashing the BIOS Without a CPU" in the section below.
- 143 -