EVGA Z690 CLASSIFIED User Manual page 101

EVGA Z690 CLASSIFIED (121-AL-E698)
The icon of the file folder in the upper right is "Connector Settings." This is the window
for setting up port detection. The default setting in this Window allows the Manager to
create a popup notification to let you know when you've plugged in a new device to a
Realtek port while Windows is running. The popup box will let you confirm which
device you've plugged in (e.g. after plugging in a microphone cable, the popup box may
incorrectly select "Line In," which you should then change to Microphone). If you'd
prefer to disable this notification, then deselect the "Enable auto popup dialog" option.
The "Disable front panel jack detection" option is mostly used for troubleshooting in
cases where the Realtek Manager refuses to acknowledge speakers plugged into the rear
ports, causing no sound to come out from your speakers. Should you run into that
problem, checking the box for this option will often fix situations where audio will not
play. If you plan on using your front panel audio connectors (e.g. the speaker/mic ports
on a chassis), then do not disable the front panel jack detection. The disable box
*ONLY* applies to the front panel, whereas the "Enable auto popup dialog..." covers
ALL Realtek interfaces.
- 101 -