Pre-Delivery And Installation Checklist - Cal Spas A726B Pre-Delivery Manual

Pre-Delivery and Installation
Most cities and counties require permits for exterior construction and
electrical circuits. In addition, some communities have codes requiring
residential barriers such as fencing and/or self-closing gates on property to
prevent unsupervised access to the property by children under the age of
5. Your dealer can provide information on which permits may be required
and how to obtain them prior to the delivery of your Cal Spa
We strongly recommend you have a qualified, licensed contractor perform
the installation of your in-ground or ported spa. The installation instructions
contained in the manual are for the use of a qualified contractor or
installer.
Consumers who choose to install their own in-ground spas bear sole
responsibility for any performance or warranty issues and may void portions
of their warranty as a result. For this reason, we strongly recommend they
hire an experienced professional for their installation.
For additional operating and installation information, please see your
selling dealer. To locate a dealer nearest you call 800-CALSPAS or visit
www.calspas.com.
Portable Spa
Pre-Delivery Checklist
Before Delivery
Plan your delivery route
Choose a suitable location
for the spa
Lay a 3" - 4" concrete slab
Install dedicated electrical
supply
After Delivery
Place spa on slab
Connect electrical
components
Checklist
Pre-Delivery Checklist
Before Delivery
After Delivery
In-Ground Spa
Plan your delivery route
Choose a suitable location
for the shell and equipment
pack
Excavate the hole
Install dedicated electrical
supply
Install dedicated NG line for
gas heater
Install shell in ground
Install equipment pack
Connect plumbing
Connect electrical
components
Pour the deck
.
®
1