Fig. 66 Normal-Density And Dual-Density Modes - Epson MX-80 Operation Manual

(3) Difference between ESC K and ESC L
The normal-density mode is accessed with ESC K. The dual-density mode is
accessed with ESC L.

Fig. 66 Normal-Density and Dual-Density Modes

NOTE: Print alignment under the friction feed.
EPSON is carefully applying printer mechanisms of better quality for MX-80
Type II and MX-80 F/T Type II. However, due to the nature of friction feed in
which paper may slip, it is not available to use the bit image mode while feeding
the cut sheet or the roll paper in the MX-80 F/T Type I I. If the accuracy of line
feed is critical, the fanfold paper must be used.
- 7 5 -