Clearing A Pap Er Jam; Clearing A Paper Jam; Using Bidirectional Adjustment Mode - Epson LQ-670 User Manual

Clearing a Pa per Jam
To clear a p ap er jam , follow these step s:
1 Press the Op era te button to turn off the printer.
2. Open the printer cover.
3. If continuous paper is load ed in the printer, rem ove it as
d escribed in "Rem oving continuous paper" in Chap ter 3.
If continu ou s p ap er is jam m ed in the printer, tear off the
fresh sup ply at the back of the p rinter.
4. Turn the knob on the right sid e of the p rinter tow ard you to
rem ove the p ap er. Rem ove any rem aining p ieces.
5. If the paper is stu ck w here the p rinter ejects it, gently p ull
the paper ou t of the printer.
6. Close the printer cover and p ress the Op era te button to
tu rn on the printer. Make sure the Pa p er Out light is not
flashing and the Pa use light is off.
Caut ion:
c
Use the knob on the right side of the printer only to clear paper
jams when the printer is off. Otherwise, you may damage the
printer or change the top-of-form position.

Using Bidirectional Adjustment Mode

If you notice that the vertical lines in you r printout are not
prop erly aligned , you can use the p rinter's bid irectional
ad justm ent m od e to correct this p roblem .
Du ring bid irectional ad justm ent, the p rinter p rints three
sheets of alignm ent patterns, labeled Draft, Draft Cop y, and
LQ. As d escribed below , you select the best alignm ent p attern
from each sheet.
7-24
Troubleshooting