Transporting The Printer - Epson LQ-670 User Manual

Caut ion:
c

Transporting the Printer

If you need to transp ort you r p rinter som e d istance, carefu lly
rep ack it as d escribed below , u sing the original box and p acking
m aterials.
1. Tu rn off the p rinter and rem ove any p ap er load ed in the p rinter.
2. Unp lu g the p ow er cord from the electrical ou tlet; then
d isconnect the interface cable from the p rinter. If an op tional
cu t-sheet feed er is installed , rem ove it.
W arning:
w
If the printer has been used recently, the print head may be hot.
Let it cool before attempting to remove the ribbon cartridge.
3. Rem ove the p ap er gu id e. Rem ove the ribbon cartrid ge as
d escribed in step s 1 throu gh 3 of "Rep lacing the Ribbon
Cartrid ge" earlier in this chap ter. Then close the p rinter cover.
4. Rep ack the p rinter, ribbon cartrid ge, p ap er gu id e, and p ow er
cord in the original p acking m aterials and p lace them in the
p rinter's original box.
6-6
M aintenance and Transportation
N ever use alcohol or thinners to clean the printer; these
chemicals can damage the printer components as well as
the case.
Be careful not to get water on the printer mechanism or
electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the printer mechanism.
Contact your EPSON dealer if you think lubrication is
needed.