Operating Instructions - Stihl FS 260 Instruction Manual

English
2.
► Disconnect wire rod from the transport guard.
► Swing wire rod outwards.
► Fit transport guard on saw blade from below,
making sure the limit stop is properly seated in
the recess.
► Swing wire rod into position.
► Hook wire rod to the transport guard.
32
1.
2.
14.5 Universal Transport Guard
2.
► Disconnect wire rod from the transport guard
and swing it outwards.
► Fit the transport guard on the cutting attach‐
ment from below.
► Attach wire rod to the hook on the transport
guard.

15 Operating Instructions

15.1 During break-in period
A factory-new machine should not be run at high
revs (full throttle off load) for the first three tank
fillings. This avoids unnecessary high loads dur‐
ing the break-in period. As all moving parts have
to bed in during the break-in period, the frictional
resistances in the engine are greater during this
period. The engine develops its maximum power
after about 5 to 15 tank fillings.
15 Operating Instructions
1.
2.
0458-743-0121-E