Important Notice - Blizzard Power Plow 810SS Assembly & Operation Manual

Hide thumbs Also See for Power Plow 810SS:

Table of Contents

IMPORTANT NOTICE

Model 810SS Snowplows (2002 Only)

This notice has been issued for all 2002 Model 810SS snowplows that have a flow control valve on the hydraulic manifold.

The Sequencing Valve & Hydraulic Hose Identification Guide (Model 810SS) label (BLZ 1052), located under the A-frame

cover, is incorrect. The flow control (FC) valve adjustment instruction is reversed on the label. The correct illustration and

instruction is shown below.

In addition, the illustrations on pages 6 and 33 of the 2002 Model 810SS Assembly & Operation Manual (Form 1282-10-02)

and the troubleshooting instruction (page 33) are also incorrect. Please note these important changes on your A-frame label

and in the manual.

95 AIRPARK BOULEVARD

Issued December 20, 2002

RV5

RV4

R-WINGEXT R-SLDRET

RV3

Angle Pressure Relief Valve

Wing Pressure Relief Valves

CALUMET, MI 4991 3

S10

RV2

RV1

L-SLDRET L-WINGEXT

Clockwise - Increases Manifold Flow Rate

Counterclockwise - Decreases Manifold Flow Rate

[906] 482-5555

[906] 482-5445 FAX

1292-12-02

Table of Contents