Comfort Airflow And Intelligent Eye Operation - Daikin CTXJ25TVMAW Operation Manual

4-3-4 Comfort airflow and Intelligent eye operation

You can use Comfort and Intelligent eye operation separately,
or combine them.
Comfort airflow operation
The unit will automatically change the direction of the airflow to
heat up or cool down the room more effectively. Direct airflow
from the unit will be less noticeable.
a
b
c
a Flap position in cooling and dry operation
b Flap range in heating operation (vertical airflow ON)
c Flap position in heating operation (vertical airflow OFF)
In cooling and drying
The airflow direction will change to spread the air along the ceiling.
Comfort airflow ON
In heating
The airflow direction will change to spread the air along the floor.
The unit detects the room and floor temperature and
automatically selects 1 of the 3 airflow directions.
Warming up Downward direc-
tion
Vertical airflow direction sends air directly downward, so if there
is a curtain rail or other object below the air conditioner that
obstructs the flow of air, in some cases it may not be sufficiently
effective.
INFORMATION
If you want to deactivate the Vertical airflow function (e.g. in
case there is furniture or another object under the unit), refer
to "To turn ON/OFF Vertical airflow function" on page 9. If the
Vertical airflow function is deactivated, the airflow will be set
to downward direction.
INFORMATION
Powerful and Comfort airflow operation CANNOT be used at
the same time. The last selected function takes priority.
If the Vertical automatic swing is selected, Comfort airflow
operation will be cancelled.
9
Comfort airflow OFF
Vertical airflow
direction
To turn ON/OFF Vertical airflow function
1. Press for at least 2 seconds.
Result: The menu appears on the display.
2. Press
or to change the menu screen.
Result: The menu appears on the display.
3. Press
to change the setting.
4. Press or to change the setting.
...is blinking
5. To confirm the selected setting press
Note: The display automatically returns to the default screen
after 60 seconds. To return to the default screen sooner, press
twice.
Intelligent eye operation
The system detects movement in the room and automatically
adjusts the airflow direction and temperature in order to avoid
direct contact with people. If no movement is detected for 20
minutes, the system switches to energy saving operation:
Operation Energy saving operation
Heating Temperature is lowered by 2°C.
Cooling and drying
If the temperature in the room is:
• ≤30°C, the temperature is raised by 2°C
• >30°C, the temperature is raised by 1°C
Fan only Decreases airflow rate.
About Intelligent eye sensor
NOTICE
• Do NOT hit or push the Intelligent eye sensor. Doing so may
lead to malfunction.
• Do NOT place large objects near the Intelligent eye sensor.
• Detection range. Up to 9 m.
If the installation height is 180cm or less, the distance at which
detection is possible will become shorter.
• Detection sensitivity. Changes according to location, the
number of persons in the room, temperature range, etc.
• Detection mistakes. Sensor may mistakenly detect pets,
sunlight, moving curtains, etc.
Vertical airflow function is...
turned ON
turned OFF
.