Install Ink Cartridges - Epson Stylus Photo RX620 Start Here Manual

2
Route the cable in the channel along
the side of the RX620, as shown.
4

Install Ink Cartridges

1
Plug your Stylus Photo RX620 into an electrical outlet, then press the
O n button. The green light comes on and the ink cartridge holder
moves to the left.
2
Open the ink cartridge holder.
3
Remove the ink cartridges from their packages
4
Insert each ink cartridge, then press it down so it clicks into place.
5
Close the ink cartridge holder, then close the scanner section.
On button
Press
continue