Setup; Indication Of The Switching Status; Function Table - Siemens SITRANS L Series Operating Instructions Manual

Setup

6.1

Indication of the switching status

The switching status of the electronics can be checked via the 360° status indication
(LEDs) integrated in the upper part of the housing.
The colours of the 360° status indication have the following meaning: (Default
setting)
•
•
•
•
•
6.2

Function table

The following table provides an overview of the switching conditions depending on
the set mode and the level (factory setting).
Coverage
Covered
Uncovered
SITRANS LCS050
Operating Instructions, 02/2021,
A5E50859888
Green lights up - power supply connected, transmitter output high-impedance
Green flashing - Maintenance required
Yellow lights up - power supply connected, transmitter output low impedance
Red lights - shortcircuit or overload in the load circuit (transmitter output high-
impedance)
Red flashing - Error at transmitter or electronics (transmitter output high
impedance) or device is in simulation
Switching status
Output 1
open
closed
a
Switching status
Output 2
closed
open
b c
Control lamp
Green
Yellow
6
17