Switch-On Phase - Siemens SITRANS L Series Operating Instructions Manual

1
2
3
Figure 5.2
Contact, plug connector
1
2
3
4
5.4

Switch-on phase

After switching on, the device first carries out a self-check.
The current measured value is then output on the signal cable.
SITRANS LCS050
Operating Instructions, 02/2021,
A5E50859888
Voltage supply
PNP switching
NPN switching
Wiring plan M12 x 1 plug - Transistor output, three-wire
Function/Polarity
Voltage supply/+
Transistor output 2
Voltage supply/-
Transistor output 1/IO-Link
Connecting
5.4 Switch-on phase
15