Connection Of Other Accessories (Commercially Available Parts) - Kenwood HM-331 Instruction Manual

8
Connection of Other Accessories
CAUTION
Note on Connection
Connect the components as shown in the diagram.
Only plug the power cord into a power outlet once
connections are completed.
DIGITAL OUT jack
(OPTICAL)
DIGITAL
OUT
OPTICAL
Optical-fiber
cable
Cap
If necessary, remove the
cap and plug the optical-
fiber cable (optional)
Optical-fiber cable
MD recorder or
DAT etc.
AUX INPUT
R
VCR, Analog turntable with built-in
RIAA equalizer (optional P-110), etc.
Other countries
FM
300
FM
75
AM
GND
ANTENNA
FM
300
FM
75
AM
GND
DIGITAL
OUT
OPTICAL
AUX INPUT
R L
L
Audio cord
Notes Notes
Audio output
1.In case an associated system component is connected, also read
the instruction manual of the component.
2.Insert the optical-fiber cable straight into the connector until it clicks.
3.Be sure to attach the protection cap when the connector is not used.
4.Never band or bundle the optical-fiber cable.
(Commercially Available Parts)
FM outdoor antenna
Lead the 75 coaxial cable con-
nected to the FM outdoor antenna
into the room and connect it to the
FM 75 terminal. Please remove the
indoor antenna after an outdoor an-
tenna has been installed.
FM
75
AM
SPEAKERS
(6–16 )
+
L GND
–
–
R
+
SUPER
WOOFER
PRE OUT
MANUAL AUTO
PANEL
OPEN/CLOSE
AC 110–120V AC 220–240V
POWER cord
TO WALL AC OUTLET
System connection
HM-331 (En/T)
10mm 10mm
Antenna adaptor (optional)
Europe, and U.K.
SUPER WOOFER