A-1
TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-2)
230 VAC single phase, 40 amps
The Demo Zone is intended for display and demonstration use. It is intended for light duty operation.
The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power
limitation, power sources (except Ranger 250 and ZR-10) when used at maximum output must be oper-
ated at low duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.
HEIGHT
86.00 in.(With Sign)
65.00 in. (With out Sign)
2184.4 mm (With Sign)
1651.1 mm (With out Sign)
INSTALLATION
ELECTRICAL INPUT REQUIREMENTS
Voltage Specification
RATED OUTPUT
PHYSICAL DIMENSIONS
WIDTH
68.00 in.
1727.2 mm
DEMO ZONE
DEPTH
54.00 in.
2150 lbs. (w/o gas cylinders)
2910 lbs. (with gas cylinders)
1371.6 mm
975.2 kg. (w/o gas cylinders)
1319.9 kg. (with gas cylinders)
A-1
Input Connection
Specification
Type 6-50P plug
WEIGHT