The Functions - Yamaha EZ-300 Owner's Manual

The Functions

The Functions settings provide access to a range of detailed instrument parameters
such as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
Each time the [FUNCTION] button is pressed, the
Function number increases one by one. To
decrease the Function number by one, simulta-
neously hold down the [FUNCTION] button and
press the [-/NO] button briefly. Simply pressing
only the [+/YES] or [-/NO] button does not
change the Function number.
Current value
00
Transpos
001
Function number
After a few seconds, the Function name may be
replaced with the setting value depending on the
selected Function.
NOTE
• When the Function settings display does not appear,
press one of the [VOICE], [SONG] or [STYLE] buttons,
and then press the [FUNCTION] button again.
• The Function number does not appear in the display dur-
ing Song, Style or Metronome playback. The beat value
appears instead.
Function List
Function
Function name
Number
Overall
001 Transpose
002 Tuning
003 Split Point
004 Touch Response
Main Voice (page 24)
005 Volume
006 Octave
007 Chorus Depth
60
EZ-300 Owner's Manual
Press several
times as
necessary
Function name
Display Range/Settings
Transpos
-12–12
Tuning 427.0Hz–453.0Hz
SplitPnt
036–096 (C1–C6)
1 (Soft),
2 (Medium),
TouchRes
3 (Hard),
4 (Fixed)
M.Volume
000–127
M.Octave
-2 – +2
M.Chorus
000–127
2
Set the value by using the number but-
tons [0]–[9], [+/YES], [-/NO].
• Decrement
value by 1.
• No
Press simultaneously
• Off
to recall the default
setting.
3
To exit from the Function settings, press
one of these buttons; [VOICE], [SONG]
or [STYLE].
Default
Value
00 Determines the pitch of the instrument in semitone increments.
Determines the fine tuning of the pitch of the entire instrument in
440.0Hz
approx. 0.2Hz increments.
Determines the highest key for the Split Voice and sets the Split
"point"—in other words, the key that separates the Split (lower)
54 (F#2)
and Main (upper) Voices. This setting is applied to the Accompa-
niment Split Point setting (page 45).
2 (Medium) Refer to page 26.
Determines the volume of the keyboard performance when per-
*
forming along with a Song or a Style.
* Determines the octave range for the Main Voice.
Determines how much of the Main Voice's signal is sent to the
*
Chorus effect.
Direct
numeric entry.
• Increment
value by 1.
• Yes
• On
Descriptions