Table of Contents
Advertisement
G1075—58-Pc. Clamping Kit
G1076—58-Pc. Clamping Kit
This clamping kit includes 24 studs, 6 step block
pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts, and
6 end hold-downs. The rack is slotted so it can be
mounted close to the machine for easy access.
Figure 37. 58-Pc. clamping kits.
H2939—4-Pc. Edge Finder Set
This is a must have set for any shop. 4 different
styles to cover any setup problem! Set includes 1
each: 3/8" diameter with point, 3/8" dia. combina-
tion with a point and .200" shoulder, 1/2" dia. with
a point and 1/2" dia. with .200" shoulder.
Figure 38. H2939 4-Pc. Edge Finder Set.
order online at
Model T25937 (Mfd. Since 3/16)
⁄
" T-Nut
1
2
⁄
" T-Nut
5
8
www.grizzly.com
G9629—Universal Indicator Holder
Mount your test indicator right on your mill for
guaranteed accurate readings. C-frame holder
mounts with a single screw directly on the quill
and does not interfere with the cutting tool.
Clamping diameter is 1
clamping bracket to the indicator is 4
for all popular indicators with a
Figure 39. G9629 Universal Indicator Holder.
G9610—Test Indicator
0.03" Range/0.001" Resolution
G9611—Test Indicator
0.008" Range/0.0001" Resolution
G9612—Test Indicator
0.030" Range/0.0005" Resolution
These test indicators have an easy to read dial
and a pivoting stylus that moves at right angles to
the dial face.
Figure 40. Test Indicator.
1-800-523-4777
or call
⁄
". The length from the
7
8
⁄
". Suitable
1
2
⁄
" shank.
5
32
-23-
Advertisement
Table of Contents
