Robertshaw RS9110 Operation Manual page 11

Custom Programming
This thermostat can be configured to have 7 Day or 5+1+1 programming. If 7 Day is
selected, all seven days will need to be programed individually. If 5+1+1 programming
is selected, Monday–Friday will be programmed together and Saturday and Sunday
will need to be programmed individually. There are four time periods for each day
(WAKE, LEAVE, RETURN, SLEEP).
Follow the steps below to customize your program schedule:
1. Select HEAT or COOL. Note: Heat and cool need to be programmed separately.
2. Press MENU (If menu does not appear first, press RUN SCHED).
3. Press SET SCHED. Note: Monday–Friday (or Monday if in 7 Day mode) will be
displayed and the WAKE icon is shown.
4. Time will be flashing. Use
WAKE time period for Monday–Friday (or Monday if in 7 Day mode).
5. Press NEXT STEP.
6. The set-point temperature will be flashing. Use
set-point selection for the WAKE time period for Monday–Friday (or Monday
if in 7 Day mode).
or to make your time selection for the
PROGRAMMING
or to make your
9