Panasonic VIERA SA-BX500EB Service Manual page 32

SA-BX500EB / SA-BX500EE / SA-BX500EG
Step 4 Cut 3 tie wraps.
Note: During assembling it is necessary to use tie wraps.
Step 5 Attach 12P cable to the connector (JW4602) on
Speaker P.C.B..
Step 6 Attach 9P cable to the connector (JW4603) on Speaker
P.C.B..
Step 7 Remove 6 screws on D-Amp B (3CH) and Fan P.C.B.
Step 8 Remove 2 P.C.B. bracket on D-Amp B (3CH) P.C.B.
Step 9 Flip D-Amp B (3CH) and Fan P.C.B. as arrow shown.
Step 10 Move Speaker P.C.B. as arrow shown.
Step 11 Proceed to check D-Amp B (3CH) and Fan P.C.B.
32