Table of Contents
Advertisement
MAINTENANCE
Cleaning plastic mesh filter
The mesh filter should be cleaned regularly to
prevent clogging and maintain optimal
performance.
First remove the front panel. It should be held on
magnetically. Then remove the plastic mesh filter
by pulling on the tabs on the side.
Remove dust by vacumming.
If the mesh filter is particularly dirty, wash it with
warm, clean, soapy water. Do not use chemical
solvents. Air-dry the filter out of direct sunlight.
After cleaning, re-insert plastic mesh filter so it
sits flat and isn't buckled.
Replacing activated carbon and HEPA filters
Activated carbon and HEPA filters cannot be washed. Instead they need to be replaced
every 9 – 18 months (depending on the air quality in your home). An average home will
need filters changed once per year. Replacement filters can be found at the retailer where
you purchased this appliance.
The appliance will keep track of the number of
days you have used a filter on the filter usage
day counter to indicate when you should
change it.
To replace a filter, turn off the appliance and
remove the front panel and plastic mesh filter.
Remove the activated carbon or HEPA filter by
the fabric tab.
Before inserting a new filter, press the very
small button in the filter cavity to reset the filter
usage day counter. You may need a pen or a
needle to poke the button.
Now insert your new filter taking note of the
"FRONT" side of the filter. Replace plastic
mesh filter and front panel.
– 19 –
Advertisement
Table of Contents
