Dimplex GDDEYS40A Instruction Manual page 15

EMPTYING THE TANK AND DRAINAGE
Continuous drainage
If your house suffers from constant high humidity and you do not want to empty the tank
frequently, you can connect a drain-pipe (internal pipe diameter is 9mm) into the side of the
appliance to continuously drain the dehumidified water.
1) Locate the drainage outlet, shown below on the
side of your appliance and insert a screwdriver
into the circular groove and break off the drain
hole cover.
2) Remove the tank and in the back of the
drainage cavity of the appliance towards the
right, there should be a lever, push that lever to
the side to expose the drainage outlet nozzle.
3) While pushing that lever open, connect a drain-
pipe firmly to the drainage outlet nozzle through
the whole in the side of the appliance that you
have made.
Please note:
The continuous drainage pipe is gravity fed. Make
sure that the height of the drainage pipe is lower
or equal to the height of water outlet.
– 15 –