Abit IX48 GT3 User Manual page 33

CPU/SYS/AUX1 ~ AUX4 FAN Speed
These items display the speed of the fans connected to CPU, SYS, and AUX1~AUX4 fan
connectors.
- Shutdown Enable
Use <Space> key to enable system shutdown function. Once the system has detected that the
fan speed is lower than the low limit value, system will shutdown automatically.
- Beep Enable
Use <Space> key to enable warning beeps function. If the fan speed is lower than the low limit
value, warning beeps will sound.
- Low Limit
These items set the low limit of fan speed.
FanEQ Control
► 1st FanEQ Group
► 2nd FanEQ Group
:Move Enter:Select +/-/PU/PD:Value
1st FanEQ Group
Click <Enter> key to enter its submenu (1st FanEQ Group):
CPU FanEQ Control
-Reference Temperature
-Control Temperature High
-Control Temperature Low
-Fan PWM Duty Cycle High
-Fan PWM Duty Cycle Low
SYS FanEQ Control
AUX1 FanEQ Control
:Move Enter:Select +/-/PU/PD:Value
IX48 GT3
μGuru Utility v1.01C
ABIT EQ
FanEQ Control
Press Enter
Press Enter
μGuru Utility v1.01C
ABIT EQ
1st FanEQ Group
Enabled
CPU Temperature
66°C/150°F
35°C/95°F
100 %
60 %
Disabled
Disabled
Item Help ►►
F10:Save ESC:Exit
Item Help ►►►
F10:Save ESC:Exit
2-7