Fitting the thermal insulation and casing
Fig. 12
07. Carefully push open the right and left-hand sliders
on the programming unit.
08. Position the front of the top panel and secure:
■
Secure the gas spring.
■
Secure the short and long links, each with two
M6 hexagon socket screws.
(cont.)
8.
9.
09. Insert one M6 screw halfway into the right-hand
side panel and likewise another into the left-hand
side panel.
10. Pivot the front of the top panel downwards. The
braces should rest on the screws in the side pan-
els.
7.
10.
17