Steps - commissioning, inspection and maintenance
Commissioning steps
Inspection steps
Maintenance steps
•
1. Filling the DHW cylinder...................................................................................................... 14
•
•
2. Shutting down the system
•
•
3. Checking the safety valve function
•
•
4. Checking the anode earth current with an anode tester.................................................. 14
•
•
5. Cleaning the inside of the DHW cylinder........................................................................... 14
•
•
6. Checking and replacing the protective magnesium anode.............................................. 15
•
•
7. Returning the DHW cylinder to use.................................................................................... 16
•
•
8. Checking the connections on the water side for tightness
Commissioning, inspection, maintenance
Page
13