Table of Contents
Advertisement
Available languages
Available languages
Auto Scan Interval
While Auto Scan running, set up the interval to "n" second intervals - where "n" is a number
from 1 – 4.
Note: The "n" stands for the number of seconds that the focus dwells on a port before
switching to the other one. Replace the "n" with a number between 1 and 4 when
entering this hotkey combination. (See the table, below.)
Scan Interval Table
n
1
2
3
4
Hotkey Configuration
After invoking Hotkey System Mode [Ctrl] + [F12], key-in one of the following keys to perform
the corresponding function:
Key
F1
Sets the PC Compatible keyboard operating platform.
F2
Sets the Mac keyboard operating platform.
F3
Sets the Sun keyboard operating platform.
F4
Prints out the current hotkey, keyboard operating platform, and language code
settings.
[ESC] or
Cancel operation platform setting
[Space]
R [Enter]
Resets the Hotkey settings to their default status.
Secs.
3 secs.
5 secs.(Default)
10 secs.
20 secs.
Function
3
Advertisement
Table of Contents
