Advertisement
2.3.2 Video Mode and Video Status LED
To begin recording video, first ensure that you are in Video mode. To
enter Video mode, simply press the Video button located on the side of
your camera. Once Video mode is enabled, the Video status LED will
remain solidly illuminated in RED and the camera will emit an audible
beep.
NOTE: Your camera enters Video mode automatically each time you
power your camera on or off.
Once your camera is in Video mode, tap the power/record button once
to begin recording. The camera will emit an audible beep, and the main
status LED will slowly flash in GREEN.
To stop recording, tap the power/record button again and the camera
will return to standby. The main status LED will return to solidly
illuminated, and the camera will emit an audible beep. Your video files
will be stored on your MicroSD memory card.
The Video status LED will stay solidly illuminated when Video mode is
enabled.
2.3.3 Photo Mode and Photo Status LED
To capture a photo, first ensure that you are in Photo mode. To enter
Photo mode, simply press the Photo button located on the side of your
camera. Once Photo mode is enabled, the Photo status LED will remain
solidly illuminated in RED and the camera will emit an audible beep.
NOTE: Your camera reverts back to Video mode automatically each
time you power your camera on or off.
Once your camera is in Photo mode, tap the power/record button once
to capture a photo. The camera will emit an audible beep, and the
main status LED flash once per photo captured. Your photo files will be
stored on your MicroSD memory card.
The Photo status LED will stay solidly illuminated when Photo mode is
enabled.
Advertisement
